[Function Description]
The three-axis six-knife CNC wood lathe is a three-axis six-knife design that can process three pieces of wood at a time. Six knives are fed in at the same time, which can greatly improve production efficiency and is suitable for batch processing of the same products.
Overview of Three-Axis Six-Knife CNC Wood Lathe
The new three-axis six-knife CNC wood lathe is a CNC wood lathe designed for factories with mass production and processing. Compared with the old three-axis six-knife CNC wood lathe with a processing diameter of 120mm, it has now been upgraded to a diameter of 160mm, which means that the new three-axis six-knife CNC wood lathe can process 3 products with a diameter of 160mm and a length of 1500mm at a time. Compared with the old 1512 model CNC wood lathe, the new model upgrades the 5.5KW motor to a 7.5kw three-phase asynchronous high-torque motor, which has greater torque, greater turning volume, and higher processing efficiency. It is more suitable for batch processing of products of the same size. Three identical products can be processed at a time. The processed products are more standard, with the same length and diameter, and higher precision. At the same time, it saves manual processing time and improves production efficiency. Three identical products can be processed in one processing time, and the daily output can reach more than 800, which can replace 3-4 manual labor forces, saving more costs for the factory and increasing production. At the same time, the machine can be equipped with a grinding wheel, which can be used to polish the product after the product processing is completed.
Advantages of Three-Axis Six-Knife CNC Wood Lathe
Three axes and six knives can process three raw materials at the same time, which is more efficient, saves labor and electricity.
Three independent large-diameter center sheaths and tool holders are equipped with three bearings, which can be used to process thinner and longer products.
The main motor uses a 7.5KW high-torque high-speed motor with a maximum speed of 6000r/m. The speed can be adjusted to match different products through the frequency converter.
The whole machine uses heavy-duty machined casting bed, thickened spindle box/rear tailstock, high-temperature tempering, and stress relief treatment, making it more stable and non-deformed.
Using highly flexible and bend-resistant pure copper cable, it can be used for a long time. Frequent bending will not damage the wire surface and cause leakage, making it safer to use.
Application Scope of Three-Axis Six-Knife CNC Wood Lathe
Heavy-duty three-axis six-knife CNC wood lathes have a wide range of uses and are widely used in various industries, wooden furniture accessories, furniture, building materials and other products in daily life, including various wooden ornaments, wooden bowls, vases, wooden cups that can be seen everywhere, frequently used sporting goods, baseball bats, musical instruments commonly used drumsticks, flutes, bassoons and other wind instruments, or piano tables, piano stools and other products.
Three-Axis Six-Knife CNC Wood Lathe Technical Parameters
| Model | CK-1516-3 |
| Processing Dimensions | 1500mm long * 160mm diameter * 3 pieces (the maximum diameter of a single piece is 300mm, the processing size can be customized) |
| Lathe Bed | Heavy duty integral fully cast bed body, independent anti-interference control cabinet |
| Motor | 7.5KW three-phase asynchronous motor |
| Motor Speed | 0-6000r/m |
| Driving Mode | YAKO driver |
| Frequency Converter | BEST/Hypmont high torque inverter |
| Transmission Mode | XY axis 25TBI ball screw drive, Z axis uses high-precision helical rack/TBI 32 ball screw |
| Guideway | Taiwan Hiwin high precision 25 linear square rail/25 slider |
| Equipment Cable | Pure copper anti-bending high-flexible cable |
| Control System | CatekCNC dedicated control system panel, CK1000TC |
| Lubrication System | Electric lubrication oil injection maintenance system |
| Operating Voltage | AC380V/220V 50/60Hz |
| Compatible Software | Artcam, type3, CAD drawing, CDR, solidworks UG powermill, etc. |
| Engraving Instructions | Standard G code, u00, mmg, plt |
| Security System | XYZ three-axis all photoelectric limit |
| Repeat Positioning Accuracy | ±0.02mm |
| Weight | 1900kg |
| Expanded Size | 3100*1400*1650mm |
Detailed Introduction of Three-Axis Six-Knife CNC Wood Lathe
The following are the processable products of Three-Axis Six-Knife CNC Wood Lathe
| Model | CK-1516-3 |
| Processing Dimensions | 1500mm long * 160mm diameter * 3 pieces (the maximum diameter of a single piece is 300mm, the processing size can be customized) |
| Lathe Bed | Heavy duty integral fully cast bed body, independent anti-interference control cabinet |
| Motor | 7.5KW three-phase asynchronous motor |
| Motor Speed | 0-6000r/m |
| Driving Mode | YAKO driver |
| Frequency Converter | BEST/Hypmont high torque inverter |
| Transmission Mode | XY axis 25TBI ball screw drive, Z axis uses high-precision helical rack/TBI 32 ball screw |
| Guideway | Taiwan Hiwin high precision 25 linear square rail/25 slider |
| Equipment Cable | Pure copper anti-bending high-flexible cable |
| Control System | CatekCNC dedicated control system panel, CK1000TC |
| Lubrication System | Electric lubrication oil injection maintenance system |
| Operating Voltage | AC380V/220V 50/60Hz |
| Compatible Software | Artcam, type3, CAD drawing, CDR, solidworks UG powermill, etc. |
| Engraving Instructions | Standard G code, u00, mmg, plt |
| Security System | XYZ three-axis all photoelectric limit |
| Repeat Positioning Accuracy | ±0.02mm |
| Weight | 1900kg |
| Expanded Size | 3100*1400*1500mm |
YOU MAY ALSO LIKE
Plasma cutter is a metal cutting machine. When cutting metal of small thickness, the cutting speed is extremely fast, and the cutting surface is smooth, the thermal deformation is small, and there is almost no heat-affected zone.
$3,550.00~$5,750.00
This CNC lathe has three functions that can be switched automatically. Compared with the standard model 1530, it has a multi-function spindle, which makes it more comprehensive and applicable.
$6,598.00~$7,795.00
The CNC Router With Vibration Knife adds a vibration knife to the ordinary 1325, which enables it to carve hard materials while increasing the ability to cut flexible materials, making it more widely used.
$3,800.00~$4,500.00
3D fiber laser engraving and marking machine is mainly used for fine 3D marking and engraving on the surface of various materials. 3D fiber laser engraving and marking machine is equipped with high-speed and high-precision 3D galvanometer and special software and control system, which can realize fine processing of any curved surface workpiece without out-of-focus phenomenon, and can track the deep engraving focus in real time, thereby improving processing efficiency and quality.
$2,500.00~$4,500.00
The double-knife 1530 lathe has a stable structure, simple operation and low price. It is more suitable for traditional woodworking work, start-up workers and personal studios.
$4,098.00~$5,200.00
The double-axis pool cue-specific CNC wood lathe is a CNC woodworking lathe designed specifically for pool cue production factories. This model is designed specifically for pool cues and has the characteristics of fast processing speed and high production efficiency. It can produce two pool cues at a time.
REVIEWS
Let more people know what you share.